The advent of 2017 seems to have ushered in a great amount of fear, negativity, anger, and uncertainty due to a number of factors. In an attempt to give of myself, and donate my time to causes trying to make a difference, I am going to be offering pens for sale in which the profits will be donated to various charities and organizations. These pens will be offered at a discounted price. Check out my “Pens For Change” page on the menu for more information!
I just got some new vintage celluloid rods and tubes in some different colors today, so I figured it would be a good time to update my picture of what available colors/patterns I have.
From Left to right:
- Purple and black chip
- Pinkish-purple and black chunk
- Burgundy lizard skin
- Black and red lizard skin
- Red/black/gray chunk
- Green lizard skin
- Green and black chip
- Blue/black/gray chunk, AKA fake “Impero”
- Blue crosshatch
- Blue lizard skin
- Blue and red chip
- Silver-gray crosshatch
- Gray lizard skin
- “Black granite” Mazzucchelli Cebloplast
- Gold marbled with red flecks
These come in limited diameters, so the size of the pen that can be made is somewhat constrained. Email me at email@example.com for any questions!
All my pen friends know that I’m a filling system nerd. One of my first goals as a fledgling pen maker was to design and create my own piston filling mechanism. I find it very interesting how many different filling systems evolved in the early and “golden age” of fountain pens. Cartridge and converter filling pens are great, make no mistake about that; however I love to play around with filling systems that are more complex and integrated into the pen itself.
I have wanted to build a vac filler for some time. The vac filling system has always intrigued me. It appears to be so simple, yet there are so many little nuances about it that have to be taken into consideration, otherwise it will not function properly. The pen came together fairly quickly, however I spent a lot of time trying to tweak it and solve all the little problems that kept it from functioning properly. One of the big issues I had to deal with was finding the proper seal for the plunger rod. Finally I got everything all worked out, and was able to test-ink it. Success! It’s always a good feeling to be able to solve a problem that you have been working at for a long time. This pen holds about 3.5ml on a double fill, which is about 1.5ml more than most of my piston fillers.
The pen itself is made from one of my favorite acrylics for demonstrators: Cool mint water. It has my standard nickel silver accents and clip. I figured I might as well make it nice, since I was spending a lot of time on it! The plunger rod is made from titanium, and the other fill mechanism components from ebonite. Hopefully I will be able to offer vac fill systems as an option after I thoroughly test it!
It’s always a pleasure to design and build pens for your friends and family. I particularly enjoy working with people who I have already have an established rapport with, on whatever idea they may have in their mind. The creativity and design energy always seems to flow so well! This pen was the product of a design effort between a friend and I. She had approached me with the idea to build an oversized pen, based on the vintage orange duofold. It was to be a piston filler, be built around the massive Jowo #8 nib, and feature a single wide cap band. The difficult part at first, was to procure blanks in the appropriate color. There are of course acrylic blanks available, made specifically to match, but my friend wanted alumilite, so I called on the talents of another pen maker/ blank maker to cast some blanks in a vintage burnt orange for me.
The pen construction went fairly smoothly. This was a reasonably straightforward build, and being a large pen made it easier: especially in regards to designing, building, and fitting the piston mechanism. Also, the lack of curvature in the profile made it go by more quickly. The color of the ink window was left up to me, so I chose one of my favorite materials: a nice transparent amber acrylic. I thought it went well with the whole vintage theme…like it had been stained with ink from decades of use.
The metalwork was not “hard”, but required some brainstorming beforehand. The cap band was easy enough, as it was simply a wider version of bands I normally make. The clip was the challenging part. One of the first things I thought of when discussing the design of this pen with my friend was “you know, I REALLY need to come up with a ball ended clip to pay homage to the original design.” I had never done a ball ended clip before, so I had to figure out exactly how I was going to execute it. Being that I came from a metalsmithing/jewelry making background in regards to education, I knew how I ideally would LIKE to have made the clip, however the equipment at my disposal was not permitting. Instead I figured out an alternate way of constructing the clip, which I’m happy to say, worked on the first try! This is one of the elements of the pen I’m really proud of!
All in all, My friend and I are extremely happy with the way the idea for this pen evolved, and came into fruition. I don’t do many builds like this, but I always love a good challenge and a little something new! Thanks for looking, and if you have any questions or ideas, please contact me at: firstname.lastname@example.org
I just finished this alumilite piston filler, and am quite happy with how it turned out! I have been a little obsessed lately with curvy, forward-threaded forms, and really wanted to try one with a piston filling system. This alumilite, called “sea flames”, which I purchased from Exotic Blanks, turned out to be really nice in person! As usual with most of my pens, I fabricated a clip for it from nickel silver. Clips take a lot of work to make, but I feel they are unparalleled by any factory clip, as they are designed to fit the particular pen in question. Besides, after putting all the hours in to make this a piston filler, why skimp on the clip!
This pen can of course be made as a cartridge/converter/eyedropper filler as well. Any questions can be emailed to me: email@example.com.
Hello and welcome! You’ve reached the new fancy home of Romulus Pens! Please bear with me as I begin to migrate my pictures and information from my other forms of media to this page. In the coming days I will be adding more stuff, and trying to transition from being solely based on Etsy and Facebook. If you have any questions, please don’t hesitate to shoot me an email at firstname.lastname@example.org